Thanks for the leads, i have read quite a few of induction apprentice's posts, there are some i took careful notice of with the 3/4 cyl overlap. Now if i haven't competely got it stuffed up! The firing order on this engine means each carb will see a intake 120* apart then a 480* gap before the first throat see's an intake again, if i do put a divider in it will mean 240* between each adjacent throat.ptuomov wrote: ↑Tue Nov 21, 2017 3:21 pm Maye you can get nics "Stef" or "induction apprentice" to give you some pointers on the runner length, runner diameter, taper, and the number of plenums and volume in each. You could PM them, or google some threads by them, read them, and then respond?
Google searches that might be useful:
stef intake site:speedtalk.com
induction apprentice intake site:speedtalk.com
Cheers