Does anyone have the STOCK head flow for the 088 BBC head? I am going to be working on some soon but I would like to know where I am going to start.
I have a flow bench but no heads yet so I would like to compare.
Thank you
Vic
088 BBC head flow data?
Moderator: Team
-
Frankshaft
- Guru
- Posts: 1037
- Joined: Sun Jul 05, 2015 6:01 pm
- Location:
-
mag2555
- Guru
- Posts: 4607
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: 088 BBC head flow data?
If I recall right without digging up my flow test sheets, the best stock intake on a 088 casting hit 325 cfm@ .700" lift, the Exh low topped out at 200 cfm@ .850" lift.
How much power are you needing to yank out of them?
Be sure to use a Bore adapter that is within .040" of what the real as run Bore will be!
How much power are you needing to yank out of them?
Be sure to use a Bore adapter that is within .040" of what the real as run Bore will be!
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!