off set seat fixture video

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
sbcharlie
New Member
New Member
Posts: 49
Joined: Mon Jun 06, 2011 11:44 am

off set seat fixture video

Post by sbcharlie » Mon Nov 13, 2017 1:41 pm

the video is now on u-tube on offset seat machining. it is found under off set seat fixture

statsystems
Guru
Guru
Posts: 1102
Joined: Sun Apr 03, 2016 1:17 am

Re: off set seat fixture video

Post by statsystems » Mon Nov 13, 2017 2:10 pm

Very interesting.

Forgive my ignorance, but what does offsetting the seat .030 away from the short turn gain?

Also, did you say you going to have a fixture to work with a form tool? I'd like to see a video of that.

sbcharlie
New Member
New Member
Posts: 49
Joined: Mon Jun 06, 2011 11:44 am

Re: off set seat fixture video

Post by sbcharlie » Mon Nov 13, 2017 5:52 pm

we are working on that fixture next. it will easy to use with a form tool machine. the beauty of this fixture is that you can decide where you want the offset to be and how far. thanks charlie

User avatar
Dave Koehler
Guru
Guru
Posts: 3321
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: off set seat fixture video

Post by Dave Koehler » Tue Nov 14, 2017 8:34 am

Charlie
You continue to use the words offset seat. What you are really doing there is offsetting the bottom angles, correct?
If I am right you may want to change your terminology to avoid confusion.
In future videos you may want to paint some bluing on there to show where it is not cutting.
Dave Koehler - Koehler Injection
Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."

sbcharlie
New Member
New Member
Posts: 49
Joined: Mon Jun 06, 2011 11:44 am

Re: off set seat fixture video

Post by sbcharlie » Tue Nov 14, 2017 9:02 am

yes we are offsetting the angles below the contact seat angle. i will use dykem on next video. thanks for the input charlie

Post Reply