PRI...who's going?
Moderator: Team
Re: PRI...who's going?
I just ordered 4 cases of Popcorn
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: PRI...who's going?
I'm not sure I want to know, but I get the feeling that us 'old' SpeedTalkers out-number the 'young' ones by at least 10:1...
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
-
- Guru
- Posts: 6381
- Joined: Tue Jul 24, 2012 11:15 am
- Location: Roseville, Michigan (just north of Detroit)
- Contact:
Re: PRI...who's going?
I am going to play Mike's game here ... that all depends upon what is to be considered OLD; almost everyone has a different opinion.
http://www.rmcompetition.com
Specialty engine building at its finest.
Specialty engine building at its finest.
Re: PRI...who's going?
For decades, "middle age" for me was something that started ten or more years in the future, but now unless I'm going to live to 150, I realize it's a dot in the mirror...
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: PRI...who's going?
Is there a benefit to attending this show for someone doing market research for a startup? I'm looking to open a CNC shop to support race shops and ultimately develop my own product line. I'm thinking "yes" but don't want to be a PITA walking around asking guys what they need in a supplier?
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
-
- Guru
- Posts: 1264
- Joined: Fri Feb 26, 2010 11:15 am
- Location: Gold Canyon, AZ
Re: PRI...who's going?
Rick,Rick Finsta wrote: ↑Mon Nov 20, 2017 9:16 am Is there a benefit to attending this show for someone doing market research for a startup? I'm looking to open a CNC shop to support race shops and ultimately develop my own product line. I'm thinking "yes" but don't want to be a PITA walking around asking guys what they need in a supplier?
The show will be beneficial to you in allowing you to speak with several machinery manufacturers/distributors to determine which machines will work best for your applications. But, as far as asking potential customers what they need the PRI Show is probably not your best venue. Your time is better spent calling on shops personally, within your target market, in order to get specific feed back. Most of the attendees at the show are there to find products and machinery to include into their own businesses and may feel that talking to a potential supplier is a waste of time. My opinion.
Bill
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: PRI...who's going?
Exactly what I needed, thanks!
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Re: PRI...who's going?
Rick Finsta wrote: ↑Mon Nov 20, 2017 9:16 am Is there a benefit to attending this show for someone doing market research for a startup? I'm looking to open a CNC shop to support race shops and ultimately develop my own product line. I'm thinking "yes" but don't want to be a PITA walking around asking guys what they need in a supplier?
Well if I had your goals, I would sure like to size up the competition, and at the PRI they all will be putting their best foot forward, and knowledge is power, if I understand your question. Just use your better judgement on the PITA factor, sometimes just listening to other's questions with gain one a lot of insight in many regards..
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: PRI...who's going?
Well sure with the understanding that I'm going to have to talk to Mike Jones about a camshaft for the Briggs motor in my lawnmower.
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Re: PRI...who's going?
That might be after a lengthy conversation I want to have with Mike about a custom grind for a 40 year old single-cylinder Tecumseh (that is, of course, depending on next year's tax return). I'll also have a large duffle bag for catalogs and decals, and some popcorn to-go!.Rick Finsta wrote: ↑Mon Nov 20, 2017 1:06 pm Well sure with the understanding that I'm going to have to talk to Mike Jones about a camshaft for the Briggs motor in my lawnmower.
- Rick Finsta
- Pro
- Posts: 370
- Joined: Sat Sep 13, 2014 10:22 am
- Location:
Re: PRI...who's going?
I've gotta be careful - I want to buy a cam from Mike next year!
Mike Gallo, President
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Protohawk - Design/Prototyping, Small Project Support, and Contract Manufacturing
CCA Racing Products - Torque Plates and Engine Rebuild Tooling
Re: PRI...who's going?
Me too! Seriously!Rick Finsta wrote: ↑Mon Nov 20, 2017 6:34 pm I've gotta be careful - I want to buy a cam from Mike next year!
I met/talked with Mike at PRI last year, he was a fine guy. He may have realized that I'm a hobbyist but I helped him making time passing faster when foot traffic was low (and I didn't have anyone behind me waiting for his turn). Win-win.
Re: PRI...who's going?
Its a 2 cycle right?Rick Finsta wrote: ↑Mon Nov 20, 2017 1:06 pm Well sure with the understanding that I'm going to have to talk to Mike Jones about a camshaft for the Briggs motor in my lawnmower.
Re: PRI...who's going?
You laugh, but 2 years ago I had a woman stop by to talk to me about the possibility of her using camshafts to make towel racks for her husband's "man-cave". This was during one of the busiest times of the show.j-c-c wrote: ↑Mon Nov 20, 2017 11:36 pmIts a 2 cycle right?Rick Finsta wrote: ↑Mon Nov 20, 2017 1:06 pm Well sure with the understanding that I'm going to have to talk to Mike Jones about a camshaft for the Briggs motor in my lawnmower.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: PRI...who's going?
I'm happy to talk to anyone, as long as I have the time. 99% of the people are patient, and understanding when I ask to excused for a second to answer someone else questions. It's that 1% that.........roc wrote: ↑Mon Nov 20, 2017 6:41 pmMe too! Seriously!Rick Finsta wrote: ↑Mon Nov 20, 2017 6:34 pm I've gotta be careful - I want to buy a cam from Mike next year!
I met/talked with Mike at PRI last year, he was a fine guy. He may have realized that I'm a hobbyist but I helped him making time passing faster when foot traffic was low (and I didn't have anyone behind me waiting for his turn). Win-win.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449