Welcome and have fun.
Used Carrillo Rods
Moderator: Team
-
- Expert
- Posts: 670
- Joined: Mon May 28, 2012 6:46 pm
- Location:
Re: Used Carrillo Rods
The Nazis didn't lose WWII,they just changed uniforms.Now they run the place.
-
- Pro
- Posts: 287
- Joined: Wed Sep 03, 2014 2:01 am
- Location:
Re: Used Carrillo Rods
Make sure you have the CARR bolts. If so you can run those rods in your application for your lifetime and probably your kids and grandkids.
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: Used Carrillo Rods
The older carrillo rods were build to last forever. When in doubt replace the rod bolts.
I have a set I got back in the late 70's that for the time were the best rod Made we ran them in some cup engines and late model stuff but they were used in 11 different engines had to rebush them 1 time but thats it. They are the same BE size they were back in 78 when new.
Yes they are heavy but they were built tough.
the question here is will they work with your crank. the only way to find out is weight them and use the numbers in the bob weight and spin the crank you want to use them on if you have to put lots of heavy metal in them then not the best way to go.
You can always resell them if it comes down to them not suitable
JMO
I have a set I got back in the late 70's that for the time were the best rod Made we ran them in some cup engines and late model stuff but they were used in 11 different engines had to rebush them 1 time but thats it. They are the same BE size they were back in 78 when new.
Yes they are heavy but they were built tough.
the question here is will they work with your crank. the only way to find out is weight them and use the numbers in the bob weight and spin the crank you want to use them on if you have to put lots of heavy metal in them then not the best way to go.
You can always resell them if it comes down to them not suitable
JMO
Real Race Cars Don't Have Doors
-
- Guru
- Posts: 3285
- Joined: Wed Jun 25, 2008 1:46 pm
- Location: NC
Re: Used Carrillo Rods
Ha! Yeah, they are nice. I could probably leave them to my grandkids to use as hammers.Charliesauto wrote: ↑Fri Oct 13, 2017 1:53 am Make sure you have the CARR bolts. If so you can run those rods in your application for your lifetime and probably your kids and grandkids.
They do have the CARR bolts, but I'm going to check stretch to make sure that they're within spec.
Re: Used Carrillo Rods
The crank and rods came together so I'm not too worried about bob weight. The pistons, pins and rings will be lighter though.ProPower engines wrote: ↑Fri Oct 13, 2017 3:54 am The older carrillo rods were build to last forever. When in doubt replace the rod bolts.
I have a set I got back in the late 70's that for the time were the best rod Made we ran them in some cup engines and late model stuff but they were used in 11 different engines had to rebush them 1 time but thats it. They are the same BE size they were back in 78 when new.
Yes they are heavy but they were built tough.
the question here is will they work with your crank. the only way to find out is weight them and use the numbers in the bob weight and spin the crank you want to use them on if you have to put lots of heavy metal in them then not the best way to go.
You can always resell them if it comes down to them not suitable
JMO
I broke an engine with aluminum rods. Took out two cylinders and smacked the head. I sleeved the block and surfaced the head. Overall the damage was not too terrible but I've heard horror stories about breaking steel rods. If everything checks out at Carrillo, I'm not going to worry about it. I'll make sure the bolts are good and the clearances are correct.
It'll be nice not having to worry so much about aluminum rods. A lot of guys use them with no problems. But every time my engine coughs I go into panic mode.
Re: Used Carrillo Rods
Ha! I don't think that. I had an old NASCAR 358 with similar rods. It was a beast and incredibly reliable. Racing was really fun with that engine. I checked valve lash each week, put gas in it, and went racing.Warp Speed wrote: ↑Fri Oct 13, 2017 5:39 am Ya, those heavy rods will keep it from accelerating! LOL
When I went to aluminum rods and light pistons and pins that's when the fun abruptly ended. The engine definitely accelerated faster but one break was all it took to kill my enthusiasm. No guarantees that the steel rods won't do the same thing.
Re: Used Carrillo Rods
I have run a 3" stroke with 6.25" rods and won plenty of class races. I surely wouldnt worry about a 5.7 rod!
-
- Guru
- Posts: 1264
- Joined: Fri Feb 26, 2010 11:15 am
- Location: Gold Canyon, AZ
Re: Used Carrillo Rods
It is a good idea to have Carrillo check the rods for you and the longer rods will work just fine for your application - no problem.
Bill
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Re: Used Carrillo Rods
How many performance parts suppliers out there are willing to look at their product many years down the road and re-qualify its usefulness? Carrillo gets an A+ in my book as a parts supplier.....I have an old 302 Chevy with some 5.700 LJ Carrillo rods in it that were from a Joe Huffaker championship winning SCCA Trans Am motor.....family heirlooms!
I often wonder what the NASCAR Teams benchmark is for cycling through so many sets of connecting rods and how much "life" is left in a used set of Cup parts.....
I often wonder what the NASCAR Teams benchmark is for cycling through so many sets of connecting rods and how much "life" is left in a used set of Cup parts.....