***Post Pics of what you are working on**

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
joe 90
Guru
Guru
Posts: 2078
Joined: Tue May 27, 2014 4:02 am
Location: The land of the long white cloud

Re: ***Post Pics of what you are working on**

Post by joe 90 » Fri Sep 29, 2017 11:40 pm

http://www.iforce.co.nz/View.aspx?i=2vr0xbw3.4ng.jpg

One of my different versions of frankenbishi. Just another dummy assembly without internals.

It's been put off to the side for a bit due to winter but the weather is getting better now so it's back out.

http://www.iforce.co.nz/View.aspx?i=220inuwv.ufx.jpg


Helped with a bit of this but there's always more to do.
http://www.iforce.co.nz/View.aspx?i=w4gc0yod.ab1.jpg

mag2555
Guru
Guru
Posts: 2131
Joined: Sun Sep 18, 2011 11:31 am

Re: ***Post Pics of what you are working on**

Post by mag2555 » Mon Oct 02, 2017 8:09 am

Well back to making up for my week day spent on my two Heathkit amps last week.
Spent 3/4s of Sunday on a master Intake port in these iron W2 Mopar heads.

Stock flow with 2.05"
.100"----.200"----.300"----.400"----.450"----.500"----.550"-----.600"
48.4------103.3---154-----195------207.5----219.9---226.7----249.7

Ported with 2.08" w 30 back cut.
75.4-----153.6----220.9----273.5---290.4---292.6---299.2----302.4

On now to the Exh side!
You do not have the required permissions to view the files attached to this post.

stevek
Member
Member
Posts: 197
Joined: Tue Mar 21, 2006 10:41 am

Re: ***Post Pics of what you are working on**

Post by stevek » Mon Oct 02, 2017 9:31 am

514 BBF with 55mm throttle bodies, LPG vapor injection and megasquirt.
You do not have the required permissions to view the files attached to this post.

Rick Finsta
Pro
Pro
Posts: 320
Joined: Sat Sep 13, 2014 10:22 am

Re: ***Post Pics of what you are working on**

Post by Rick Finsta » Mon Oct 02, 2017 1:35 pm

Break from car stuff... mobile grill/smoker!

Image

Image

Image

Image

Image

mag2555
Guru
Guru
Posts: 2131
Joined: Sun Sep 18, 2011 11:31 am

Re: ***Post Pics of what you are working on**

Post by mag2555 » Mon Oct 02, 2017 1:39 pm

Can you come by NY when you get that baby fired up, love BBQ!!

User avatar
bigblockmopar
Member
Member
Posts: 55
Joined: Fri Mar 25, 2016 8:53 pm
Location: Netherlands
Contact:

Re: ***Post Pics of what you are working on**

Post by bigblockmopar » Mon Oct 02, 2017 3:54 pm

stevek wrote:
Mon Oct 02, 2017 9:31 am
514 BBF with 55mm throttle bodies, LPG vapor injection and megasquirt.
Now that's sweetness right there!

cjperformance
Guru
Guru
Posts: 2532
Joined: Tue Aug 19, 2008 7:20 am
Location: South Australia

Re: ***Post Pics of what you are working on**

Post by cjperformance » Mon Oct 02, 2017 10:20 pm

stevek wrote:
Mon Oct 02, 2017 9:31 am
514 BBF with 55mm throttle bodies, LPG vapor injection and megasquirt.
In a nice early F no less. Looks like fun
Craig.

cjperformance
Guru
Guru
Posts: 2532
Joined: Tue Aug 19, 2008 7:20 am
Location: South Australia

Re: ***Post Pics of what you are working on**

Post by cjperformance » Mon Oct 02, 2017 10:20 pm

Rick Finsta wrote:
Mon Oct 02, 2017 1:35 pm
Break from car stuff... mobile grill/smoker!

Image

Image

Image

Image

Image
Will you be dyno testing this !
Craig.

Rick Finsta
Pro
Pro
Posts: 320
Joined: Sat Sep 13, 2014 10:22 am

Re: ***Post Pics of what you are working on**

Post by Rick Finsta » Mon Oct 02, 2017 10:37 pm

LOL Checking to see if it meets the trailer size restrictions for Drag Week now...

cjperformance
Guru
Guru
Posts: 2532
Joined: Tue Aug 19, 2008 7:20 am
Location: South Australia

Re: ***Post Pics of what you are working on**

Post by cjperformance » Mon Oct 02, 2017 10:58 pm

IMG_20171003_26277.jpg
Very low budget Yamaha XS650 turbo, goes great, but now needs a better clutch! , and maybe brakes ! :lol:
You do not have the required permissions to view the files attached to this post.
Craig.

mag2555
Guru
Guru
Posts: 2131
Joined: Sun Sep 18, 2011 11:31 am

Re: ***Post Pics of what you are working on**

Post by mag2555 » Tue Oct 03, 2017 7:17 am

Needing to up grade things in responded to changes is part of the norm, it's good your not blowing up stuff yet!

cjperformance
Guru
Guru
Posts: 2532
Joined: Tue Aug 19, 2008 7:20 am
Location: South Australia

Re: ***Post Pics of what you are working on**

Post by cjperformance » Tue Oct 03, 2017 6:40 pm

mag2555 wrote:
Tue Oct 03, 2017 7:17 am
Needing to up grade things in responded to changes is part of the norm, it's good your not blowing up stuff yet!
Yeah these engines are "reasonably" strong if not going crazy. Engine has had a freshen and p/b clearanced to suit the setup. Just a cheap good fun something different for an old friend , 83yrs old and still riding, just!
Craig.

tresi
Member
Member
Posts: 176
Joined: Sun Mar 24, 2013 10:10 pm

Re: ***Post Pics of what you are working on**

Post by tresi » Tue Oct 03, 2017 8:47 pm

1003171917.jpg
0826171640.jpg
355 with IK180 heads and hydraulic roller going in a 83 C10. Started this project in Missouri and then had a life threating illness along with a heart attack. Spent 3 months in the hospital and had to learn to walk again. went back to my job after missing 5 months of work only to have to medically retire. Had to move mid project to Kansas but I'm getting close to dropping it in and starting on the interior.
You do not have the required permissions to view the files attached to this post.

williamsmotowerx
Expert
Expert
Posts: 715
Joined: Sat Feb 10, 2007 1:24 pm
Contact:

Re: ***Post Pics of what you are working on**

Post by williamsmotowerx » Tue Oct 03, 2017 11:49 pm

Infinity G35X
You do not have the required permissions to view the files attached to this post.

In-Tech
Guru
Guru
Posts: 1510
Joined: Wed Apr 21, 2010 4:35 am

Re: ***Post Pics of what you are working on**

Post by In-Tech » Wed Oct 04, 2017 1:07 am

Is the machining on the valve to decrease low lift flow and/or help break up the fuel?
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl

Post Reply