***Post Pics of what you are working on**
Moderator: Team
Re: ***Post Pics of what you are working on**
Wait!! Is that an iron block!?
Ken
Ken
Over the hill but still learning!
Retaining it is the hard part.
Retaining it is the hard part.
-
- Guru
- Posts: 1575
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
Re: ***Post Pics of what you are working on**
Yes sir thats a cast iron Dart block, looks the same in the timing chain area as well. Mark H.
-
- Guru
- Posts: 1575
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
Re: ***Post Pics of what you are working on**
It's ready to get .937" CHE bronze lifter bushings and bore cam tunnel for 55mm roller cam bearings. The bores from 4.115 to 4.185". Mark H.
Re: ***Post Pics of what you are working on**
Beautiful work. I couldn't do it because it would leave me one thrown rod from suicide.
-
- Guru
- Posts: 1575
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
Re: ***Post Pics of what you are working on**
I am LOL Ron, There were moments when i would think to myself i am not sure about this. A long road for sure, thanks for the comment, Mark H.
-
- Guru
- Posts: 1037
- Joined: Sun Jul 05, 2015 6:01 pm
- Location:
Re: ***Post Pics of what you are working on**
I mean this is the nicest way. A little OCD are we?swampbuggy wrote: ↑Tue Dec 05, 2017 7:39 am I am LOL Ron, There were moments when i would think to myself i am not sure about this. A long road for sure, thanks for the comment, Mark H.
Re: ***Post Pics of what you are working on**
Holly Polishing Compound BATMAN! Can you get that ringing in your ears to go away after that much whining from the grinder?!! You are definitely a Type A "Kinda Guy" candidate of the year for "Polisher of the Year" Honors! WOW Nice Job!
The Older I Get, The Dumber I Get
-
- Guru
- Posts: 1575
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
Re: ***Post Pics of what you are working on**
Frankshaft----i am OCD maximus for sure but that is the was God made me, be it good or bad. Newold all the finish work was done by hand finishing up with 2000 grit. Mark H.
-
- Guru
- Posts: 1575
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
Re: ***Post Pics of what you are working on**
LOL yea Ron almost, but even the 2000 has to get that black dust embedded into the paper before it will polish to a reflective surface. Mark H.
-
- Guru
- Posts: 1547
- Joined: Thu Sep 29, 2011 8:55 am
- Location:
Re: ***Post Pics of what you are working on**
How much weight did it remove?
So much to do, so little time...
-
- Guru
- Posts: 1575
- Joined: Mon Apr 04, 2011 8:54 pm
- Location: central Florida
Re: ***Post Pics of what you are working on**
Englertracing------No BUT it is going back to Dart for the lifter bushing and cam tunnel machine work. So they will get to see it first hand. I think i'll put a note in with the block, please call Mr. Maskins over to see it. Actually the thought has passed through my mind-------wonder if they would trade me an alum. block for it since this is more of a handling deal than drag race deal ? As far as weight reduction i have not weighed it, thought i would wait till ALL machine work is done including deck to 9.00". Mark H.
Re: ***Post Pics of what you are working on**
Alright, here's a new one. This one actually pays the bills. Making sure a product line I'm working on doesn't violate the "this device may not cause harmful interference" statement you see on things. Although this is an industrial device so the levels and frequencies aren't the exact same.
10M radiated emissions in anechoic chamber. It's dead quiet in there and ZERO cell signal.
10M radiated emissions in anechoic chamber. It's dead quiet in there and ZERO cell signal.
You do not have the required permissions to view the files attached to this post.
- Dave Koehler
- Vendor
- Posts: 7205
- Joined: Mon Oct 04, 2004 11:19 pm
- Location: Urbana, IL USA
- Contact:
Re: ***Post Pics of what you are working on**
Reminds me of after I polished out my first intake manifold. After assembly I realized I could only see maybe 20% of my work.
The next one I dummied everything up, marked it and only polished what was visible. Much quicker job.
The next one I dummied everything up, marked it and only polished what was visible. Much quicker job.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."