Page 1 of 17
***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 6:09 pm
by user-17438
Lets all see what you guys are working on. PLEASE REFRAIN FROM GIRLFRIEND, WIFE, SISTER PICS, haha. Lets make SPEED TALK great again. No need to explain in full detail if you don't wish to.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 6:15 pm
by user-17438
hogging on some heads
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 7:06 pm
by Carnut1
0916172028d.jpg
Mild cleanup Dart 200 pre platinum ported to 248cc.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 7:21 pm
by hoodeng
Pre swarfe,883 to 1200 Sportster +.125" inlet +.140" exhaust.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 7:38 pm
by CGT
Resized_20170917_133318.jpeg
Resized_20170910_162515.jpeg
Resized_20170905_195925.jpeg
Resized_20170903_164854.jpeg
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 7:46 pm
by hoffman900
Checking clearances on the valvetrain of a Yamaha SR/TT 500 engine.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 8:16 pm
by blykins
Assembling a 496 inch Tunnel Port FE.
......and checking out how I'm going to do a cam swap on the dyno with my new 2-piece timing cover for a 351 Cleveland.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 8:36 pm
by Rick Finsta
First cuts on my first Bridgeport in my home shop! Getting ready to dry deck some cylinder heads after I mill some more of the welds flat...
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 8:49 pm
by machinedave
I'm working on yet another SBC.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 9:54 pm
by machinedave
Also resurfacing a badly eroded 1947 Pontiac straight 8 manifold on my 1950's Lempco surfacing machine.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 10:09 pm
by Cougar5.0
2017-09-09 10.42.29_sm.jpg
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 10:17 pm
by GARY C
357 SBC nitrous streetish engine if I ever finish it.
I think I need a better camera.
Re: ***Post Pics of what you are working on**
Posted: Tue Sep 26, 2017 10:26 pm
by Zmechanic
Giving this old girl some love. Sat neglected in a tool and die shop for years before the owner decided he wanted it out of his sight. She needed attention, but has great potential.
20170718_191003.jpg
20170902_185950.jpg
20170814_192158.jpg
20170915_211438.jpg
Re: ***Post Pics of what you are working on**
Posted: Wed Sep 27, 2017 6:40 am
by mag2555
Sorry, but I am taking a day off from auto things and rebuilding two1958 HealthKit Mono block auido power amps .
Re: ***Post Pics of what you are working on**
Posted: Wed Sep 27, 2017 7:50 am
by steve316
Zmechanic & Mag2555
