***Post Pics of what you are working on**

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
MTENGINES
Pro
Pro
Posts: 210
Joined: Wed May 23, 2012 1:52 am
Location: MN

***Post Pics of what you are working on**

Post by MTENGINES » Tue Sep 26, 2017 6:09 pm

Lets all see what you guys are working on. PLEASE REFRAIN FROM GIRLFRIEND, WIFE, SISTER PICS, haha. Lets make SPEED TALK great again. No need to explain in full detail if you don't wish to. :D :D

MTENGINES
Pro
Pro
Posts: 210
Joined: Wed May 23, 2012 1:52 am
Location: MN

Re: ***Post Pics of what you are working on**

Post by MTENGINES » Tue Sep 26, 2017 6:15 pm

hogging on some heads
You do not have the required permissions to view the files attached to this post.

Carnut1
Guru
Guru
Posts: 3215
Joined: Tue Jun 11, 2013 6:32 pm
Location: Melbourne fl.

Re: ***Post Pics of what you are working on**

Post by Carnut1 » Tue Sep 26, 2017 7:06 pm

0916172028d.jpg
Mild cleanup Dart 200 pre platinum ported to 248cc.
You do not have the required permissions to view the files attached to this post.
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST

hoodeng
Member
Member
Posts: 83
Joined: Sat Mar 04, 2017 6:53 pm
Location: South Australia

Re: ***Post Pics of what you are working on**

Post by hoodeng » Tue Sep 26, 2017 7:21 pm

Pre swarfe,883 to 1200 Sportster +.125" inlet +.140" exhaust.
You do not have the required permissions to view the files attached to this post.

CGT
Expert
Expert
Posts: 842
Joined: Sun May 10, 2009 12:29 pm

Re: ***Post Pics of what you are working on**

Post by CGT » Tue Sep 26, 2017 7:38 pm

Resized_20170917_133318.jpeg
Resized_20170910_162515.jpeg
Resized_20170905_195925.jpeg
Resized_20170903_164854.jpeg
You do not have the required permissions to view the files attached to this post.

hoffman900
Guru
Guru
Posts: 1091
Joined: Sat Feb 23, 2013 5:42 pm

Re: ***Post Pics of what you are working on**

Post by hoffman900 » Tue Sep 26, 2017 7:46 pm

Checking clearances on the valvetrain of a Yamaha SR/TT 500 engine.

Image
-Bob

blykins
Guru
Guru
Posts: 1732
Joined: Mon Aug 27, 2007 9:59 pm
Location: Louisville, KY

Re: ***Post Pics of what you are working on**

Post by blykins » Tue Sep 26, 2017 8:16 pm

Assembling a 496 inch Tunnel Port FE.

Image

......and checking out how I'm going to do a cam swap on the dyno with my new 2-piece timing cover for a 351 Cleveland.

Image
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com

Rick Finsta
Pro
Pro
Posts: 313
Joined: Sat Sep 13, 2014 10:22 am

Re: ***Post Pics of what you are working on**

Post by Rick Finsta » Tue Sep 26, 2017 8:36 pm

First cuts on my first Bridgeport in my home shop! Getting ready to dry deck some cylinder heads after I mill some more of the welds flat...

Image

machinedave
Expert
Expert
Posts: 995
Joined: Mon Mar 24, 2014 1:08 am

Re: ***Post Pics of what you are working on**

Post by machinedave » Tue Sep 26, 2017 8:49 pm

I'm working on yet another SBC.
You do not have the required permissions to view the files attached to this post.

machinedave
Expert
Expert
Posts: 995
Joined: Mon Mar 24, 2014 1:08 am

Re: ***Post Pics of what you are working on**

Post by machinedave » Tue Sep 26, 2017 9:54 pm

Also resurfacing a badly eroded 1947 Pontiac straight 8 manifold on my 1950's Lempco surfacing machine.
You do not have the required permissions to view the files attached to this post.

User avatar
Cougar5.0
Member
Member
Posts: 103
Joined: Wed Dec 26, 2007 4:04 pm

Re: ***Post Pics of what you are working on**

Post by Cougar5.0 » Tue Sep 26, 2017 10:09 pm

2017-09-09 10.42.29_sm.jpg
You do not have the required permissions to view the files attached to this post.

GARY C
Guru
Guru
Posts: 3342
Joined: Tue May 14, 2013 10:58 pm

Re: ***Post Pics of what you are working on**

Post by GARY C » Tue Sep 26, 2017 10:17 pm

357 SBC nitrous streetish engine if I ever finish it.
I think I need a better camera. :D
You do not have the required permissions to view the files attached to this post.

Zmechanic
Pro
Pro
Posts: 282
Joined: Wed Oct 24, 2012 9:33 am
Location: Austin, TX

Re: ***Post Pics of what you are working on**

Post by Zmechanic » Tue Sep 26, 2017 10:26 pm

Giving this old girl some love. Sat neglected in a tool and die shop for years before the owner decided he wanted it out of his sight. She needed attention, but has great potential.
20170718_191003.jpg
20170902_185950.jpg
20170814_192158.jpg
20170915_211438.jpg
You do not have the required permissions to view the files attached to this post.

mag2555
Guru
Guru
Posts: 2062
Joined: Sun Sep 18, 2011 11:31 am

Re: ***Post Pics of what you are working on**

Post by mag2555 » Wed Sep 27, 2017 6:40 am

Sorry, but I am taking a day off from auto things and rebuilding two1958 HealthKit Mono block auido power amps .
You do not have the required permissions to view the files attached to this post.

steve316
Pro
Pro
Posts: 369
Joined: Fri Apr 13, 2007 10:06 pm
Location: St.Joseph,mo.

Re: ***Post Pics of what you are working on**

Post by steve316 » Wed Sep 27, 2017 7:50 am

Zmechanic & Mag2555 =D>

Post Reply