1949 Cadillac question

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
gn69z28
Member
Member
Posts: 148
Joined: Fri Dec 28, 2007 9:33 pm

1949 Cadillac question

Post by gn69z28 » Wed Sep 13, 2017 4:54 pm

The oil pump intake seal. Looks like a thick white fuzzy washer. Comes with a stick. How do you install it and does it get stuffed into the hole the pickup goes into or installed on the pickup tube first? There was nothing there when pulling engine apart. Thanks for any help.

gn69z28
Member
Member
Posts: 148
Joined: Fri Dec 28, 2007 9:33 pm

Re: 1949 Cadillac question

Post by gn69z28 » Wed Sep 13, 2017 5:13 pm

After studying this for a while I think I have it figured out but would be nice to have someone confirm it.

mag2555
Guru
Guru
Posts: 2066
Joined: Sun Sep 18, 2011 11:31 am

Re: 1949 Cadillac question

Post by mag2555 » Thu Sep 14, 2017 6:02 am

I would think it would need to be loaded on the tube first.

Post Reply