are retracted-gap plugs still being made?

General engine tech -- Drag Racing to Circle Track

Moderator: Team

seattle smitty
Member
Member
Posts: 88
Joined: Fri Oct 05, 2007 4:06 pm

Re: are retracted-gap plugs still being made?

Postby seattle smitty » Tue Sep 12, 2017 11:00 am

quote] I covered how to get the plug you need in my post. [/quote]

I saw it and thank you, but the fact that you can come up with a letter-number-letter designation doesn't mean that they actually manufacture such a plug. I can look up L82R on your chart, but Champion no longer makes it.

statsystems
Expert
Expert
Posts: 978
Joined: Sun Apr 03, 2016 12:17 am

Re: are retracted-gap plugs still being made?

Postby statsystems » Tue Sep 12, 2017 2:58 pm

seattle smitty wrote:quote] I covered how to get the plug you need in my post.


I saw it and thank you, but the fact that you can come up with a letter-number-letter designation doesn't mean that they actually manufacture such a plug. I can look up L82R on your chart, but Champion no longer makes it.[/quote]


Call ERC racing fuels in California. You can google it. He has a bunch of champion stuff not available and may know what number superseceded the L series plug.

oldjohnno
Pro
Pro
Posts: 354
Joined: Mon Feb 01, 2010 9:58 pm
Contact:

Re: are retracted-gap plugs still being made?

Postby oldjohnno » Tue Sep 12, 2017 4:06 pm

I'm curious about why you'd use a retracted plug rather than a surface gap Smitty?
Perfectionism is the enemy of actually getting shit done.

Old as Dirt
Pro
Pro
Posts: 267
Joined: Thu Oct 08, 2009 11:09 am
Location: Monroe Washington

Re: are retracted-gap plugs still being made?

Postby Old as Dirt » Wed Sep 13, 2017 7:05 pm

Check your PM's Smitty.. you scored! :mrgreen: Looks like Motorcraft AG 403's(8) and 203's(10)..

seattle smitty
Member
Member
Posts: 88
Joined: Fri Oct 05, 2007 4:06 pm

Re: are retracted-gap plugs still being made?

Postby seattle smitty » Thu Sep 14, 2017 10:48 am

I'll check it, Dirt.

Johnno, the surface-gap plugs were quite new then, and not well known by the racers in the area. The recessed-gap plugs were well-known and had recognizable heat ranges, which the surface-gap plugs did not, for us.

midnightbluS10
Member
Member
Posts: 166
Joined: Sun Oct 20, 2013 7:41 am

Re: are retracted-gap plugs still being made?

Postby midnightbluS10 » Fri Sep 22, 2017 1:14 am

seattle smitty wrote:
I covered how to get the plug you need in my post.


I saw it and thank you, but the fact that you can come up with a letter-number-letter designation doesn't mean that they actually manufacture such a plug. I can look up L82R on your chart, but Champion no longer makes it.


You can also use that number to cross reference to other companies. My point initially was that you can use that to figure out what you need. Then see if it's being made or if someone might be selling NOS parts. Sorry if I wasn't clear or came off rude or short.

seattle smitty
Member
Member
Posts: 88
Joined: Fri Oct 05, 2007 4:06 pm

Re: are retracted-gap plugs still being made?

Postby seattle smitty » Fri Sep 22, 2017 1:11 pm

No, no, you came off fine, a member trying to be helpful! No, I was having trouble seeing whether any of the plug manufacturers makes anything like those old ones I remembered.

I have found, and this goes far beyond spark plugs, that somehow the websites and on-line "catalogs" set up by commercial enterprises of all sorts, are much MUCH harder to use than the good old printed catalogs of the pre-internet era. Maybe it's my age, but I think most commercial websites are a PITA. And on occasions when I give up my DIY efforts and phone a tech line, the fellow at the other end now often has only the same website for looking things up. Unless he has been around as long as I have, he might have no idea what I'm talking about, even when it is a product that HIS company used to make.


Return to “Engine Tech”

Who is online

Users browsing this forum: clkk, Curtis Mc, Durney, engineman1642, goldmember63, lefty o and 44 guests