351 Cleveland water outlet

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
machinedave
Guru
Guru
Posts: 1129
Joined: Mon Mar 24, 2014 1:08 am
Location:

351 Cleveland water outlet

Post by machinedave »

Who knows the part number for a 351C water outlet in the front passenger side of the block? Dornan, pioneer etc.... I ordered one a few years ago but having trouble finding one now.
You do not have the required permissions to view the files attached to this post.
Top
mag2555
Guru
Guru
Posts: 4607
Joined: Sun Sep 18, 2011 11:31 am
Location: Heading for a bang up with Andromeda as we all are.

Re: 351 Cleveland water outlet

Post by mag2555 »

Try Mr Gasket, trans dapt products, or Four seasons .
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
Top
machinedave
Guru
Guru
Posts: 1129
Joined: Mon Mar 24, 2014 1:08 am
Location:

Re: 351 Cleveland water outlet

Post by machinedave »

Thanks. I just found the Pioneer number.
Top
blykins
Guru
Guru
Posts: 2128
Joined: Mon Aug 27, 2007 9:59 pm
Location: Louisville, KY

Re: 351 Cleveland water outlet

Post by blykins »

You can also tap it for a 3/8" NPT and run a barbed pipe nipple.
Lykins Motorsports
brent@lykinsmotorsports.com
www.lykinsmotorsports.com
www.customfordcams.com
Custom Ford Windsor, Cleveland, and FE Street/Race Engines
Top
In-Tech
Vendor
Posts: 2819
Joined: Wed Apr 21, 2010 4:35 am
Location: Fresno, CA

Re: 351 Cleveland water outlet

Post by In-Tech »

machinedave wrote:Thanks. I just found the Pioneer number.
I don't need it, but why not post the Pioneer part number for others?
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
Top
machinedave
Guru
Guru
Posts: 1129
Joined: Mon Mar 24, 2014 1:08 am
Location:

Re: 351 Cleveland water outlet

Post by machinedave »

In-Tech wrote:
machinedave wrote:Thanks. I just found the Pioneer number.
I don't need it, but why not post the Pioneer part number for others?
WPT-1052
Top
cjperformance
Guru
Guru
Posts: 3661
Joined: Tue Aug 19, 2008 7:20 am
Location: South Australia

Re: 351 Cleveland water outlet

Post by cjperformance »

blykins wrote:You can also tap it for a 3/8" NPT and run a barbed pipe nipple.
Yes exactly.
Or just buy 5/8" stainless tube, cut to length, flare hose end and knock it in.
Craig.
Top
Post Reply

Return to “Engine Tech”