IMG_20170815_13357.jpg
Cant actually feel or measure the marks on the axle.
IMG_20170815_30472.jpg
Look at the bushing, you can see a mark that goes from one side to the other, this is on the loaded part of the roller in line with a flattened skid on the outside of the wheel. Measures up at .0005" of a dip in the bush at that point.
IMG_20170815_59753.jpg
Wheel not so happy.
IMG_20170815_2717.jpg
The skid, flattened area of wheel.
IMG_20170815_58234.jpg
Opening side of lobe.
IMG_20170815_1257.jpg
Closing side of lobe.
IMG_20170815_12925.jpg
Prior to pull apart, the roller wheel 'felt' smooth to turn, most of the time, then suddenly it would grip up then if turned further ir turned backward it would then free up and feel fine again, then occasionally grip up again. See the little flaw in the body im pointing the pick at, when I pulled the wheel out then started inspecting and noticed the flaw I touched it with the pick and a little flake of metal came out of there!
Fwiw all othe lifters were fine.
You do not have the required permissions to view the files attached to this post.
Craig.