Re: Super stock iron heads - work in progress
Posted: Wed Sep 06, 2017 7:56 pm
46 deg top cut, then into a radius chamber cut. 65 deg bottom cut.Can you share what top cut angle you used with the 50 deg seat?
Don Terrill’s Speed-Talk
Home of Racing's Best and Brightest
https://www.speed-talk.com/forum/
Super stock iron heads - work in progress
Page 3 of 3
Re: Super stock iron heads - work in progress
Posted: Fri Sep 08, 2017 2:38 am
very clean work makes me miss grinding!!
Guy on corvetteforum in the C3 tech needs some heads from you . In your neck of the woods
Guy on corvetteforum in the C3 tech needs some heads from you . In your neck of the woods
Re: Super stock iron heads - work in progress
Posted: Tue Sep 19, 2017 9:07 pm
Nice work Tony, they should go nicely on a MS engine 