Super stock iron heads - work in progress

General engine tech -- Drag Racing to Circle Track

Moderator: Team

KnightEngines
Guru
Guru
Posts: 1730
Joined: Fri Jan 09, 2009 8:51 pm
Location: Australia

Re: Super stock iron heads - work in progress

Post by KnightEngines » Wed Sep 06, 2017 7:56 pm

Can you share what top cut angle you used with the 50 deg seat?
46 deg top cut, then into a radius chamber cut. 65 deg bottom cut.

cuisinartvette
Guru
Guru
Posts: 1366
Joined: Fri Sep 05, 2008 11:39 pm
Location: Valencia Ca

Re: Super stock iron heads - work in progress

Post by cuisinartvette » Fri Sep 08, 2017 2:38 am

very clean work makes me miss grinding!!
Guy on corvetteforum in the C3 tech needs some heads from you . In your neck of the woods

la360
Expert
Expert
Posts: 578
Joined: Wed Oct 13, 2004 6:26 am
Location: Melbourne Australia
Contact:

Re: Super stock iron heads - work in progress

Post by la360 » Tue Sep 19, 2017 9:07 pm

Nice work Tony, they should go nicely on a MS engine :D
Alan Jones

CAL Machineworks
Billet Small Block Chrysler Parts

It's Ok to disagree, just don't be disagreeable!

Post Reply