CNC LS2 flow test
Moderator: Team
-
mag2555
- Guru
- Posts: 4602
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: CNC LS2 flow test
I poured it last night, but will not have the time to take some shots or give any dimension untill Sunday.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
mag2555
- Guru
- Posts: 4602
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: CNC LS2 flow test
Here's more info , but for the CC test out.
Intake valve 2.053"
Throat 1.866" / 91%.
Widest width of chamber across Intake valve = 3.238"
Width of short turn at crown floor= 1.672"
Width of bowl at top of valve guide = 1.971, take note of this!
Intake valve 2.053"
Throat 1.866" / 91%.
Widest width of chamber across Intake valve = 3.238"
Width of short turn at crown floor= 1.672"
Width of bowl at top of valve guide = 1.971, take note of this!
You do not have the required permissions to view the files attached to this post.
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
-
mag2555
- Guru
- Posts: 4602
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: CNC LS2 flow test
I will get this head poured by the end of the week for those who have asked!
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
Re: CNC LS2 flow test
Hand ported quick job.
You do not have the required permissions to view the files attached to this post.
"when uncomptent order unwilling to do unnecsessary the probablity of failure is high"
Re: CNC LS2 flow test
I would like to thank you guys for stepping up the quality of the threads. Molds and good drawings really help with understanding. You can really see how the ls takes the problems of the 23 degree head and improves on those problems. Valve angle, port bias, pushrod interference. Now if we could just get some airspeeds that would be cool. Thanks, Charlie
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST
-
mag2555
- Guru
- Posts: 4602
- Joined: Sun Sep 18, 2011 11:31 am
- Location: Heading for a bang up with Andromeda as we all are.
Re: CNC LS2 flow test
Nice software!
You can cut a man's tongue from his mouth, but that does not mean he’s a liar, it just shows that you fear the truth he might speak about you!
Re: CNC LS2 flow test
You are right Chad, sexy pics like that help too! Thanks!cspeier wrote:
Servedio Cylinder Head Development
631-816-4911
9:00am - 9:00pm EST
631-816-4911
9:00am - 9:00pm EST