My next 454 build

vortecpro · Post by **vortecpro** » Tue Nov 08, 2016 9:15 pm

Heres a video from todays dyno test.
https://youtu.be/DjIVRz_w9bw

pdq67 · Post by **pdq67** » Tue Nov 08, 2016 9:45 pm

I haven't read this WHOLE thread, but VortecPro, I would like to offer my comments..

Pretty-much a stock build, BUT....

About a 9.5 to 1 CR, -206 way early large oval real, "closed", chambered stock cast-iron heads plunge cut for bigger valves and of course bowl-blended along with a, "dingle berry", port clean up and a Holley Strip Dom. oval port intake with an 850 on it and 4-tube, small tube, headers

My UDHarold custom solid flat tappet lifter cam spec'd at 278/249/161, 110/106, .618" lift and needs .018" hot lash.

Sucker should cook!

As always, just trying to help and hope this will be taken under consideration.

pdq67

Carnut1 · Post by **Carnut1** » Tue Nov 08, 2016 10:03 pm

vortecpro wrote:Heres a video from todays dyno test.
https://youtu.be/DjIVRz_w9bw

Just a great sounding responsive engine! I expect more from the larger ports. Thanks, Charlie

MadBill · Post by **MadBill** » Wed Nov 09, 2016 8:19 pm

Great running engine! What was the dyno correction factor?

vortecpro · Post by **vortecpro** » Wed Nov 09, 2016 9:22 pm

MadBill wrote:Great running engine! What was the dyno correction factor?

Thanks, STP 1.275 correction factor. Baro was 24.00.

MadBill · Post by **MadBill** » Wed Nov 09, 2016 10:39 pm

We near-sea level dwellers (640' for me) don't appreciate how good we have it. As I type, my Casio 'Triple Sensor' watch is showing 29.40" uncorrected...

mdabbott2009 · Post by **mdabbott2009** » Thu Nov 17, 2016 9:01 pm

Any updates????

vortecpro · Post by **vortecpro** » Thu Nov 17, 2016 9:08 pm

mdabbott2009 wrote:Any updates????

I'm working on it, thanks for your interest!

mdabbott2009 · Post by **mdabbott2009** » Wed Dec 14, 2016 9:00 pm

It's killing me I gotta see results

cjperformance · Post by **cjperformance** » Wed Feb 15, 2017 5:35 am

mdabbott2009 wrote:It's killing me I gotta see results

Yes hows this going?

Old School · Post by **Old School** » Sun Jul 15, 2018 10:15 pm

I am sure by now this engine is finished. How much power and torque did it make?

vortecpro · Post by **vortecpro** » Mon Jul 16, 2018 8:20 am

After reconsidering the stupidity of my combination, thanks to all that pointed it out, I went with a different combination. Here's the build for anyone who might be interested. BTW 650 HP street 496 drag test happens this week!

http://drr.infopop.cc/eve/forums/a/tpc/ ... 2167035976

vortecpro · Post by **vortecpro** » Mon Jul 16, 2018 8:21 am

After reconsidering the stupidity of my combination, thanks to all that pointed it out, I went with a different combination. Here's the build for anyone who might be interested. BTW 650 HP street 496 dyno/drag test happens this week!

http://drr.infopop.cc/eve/forums/a/tpc/ ... 2167035976

Don Terrill’s Speed-Talk

My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build

Re: My next 454 build