Page 43 of 46

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 5:39 am
by Olds455
=D>

You people are more petty than 13 yr old girls that just got their feelingZ hurt.

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 5:40 am
by steve cowan
C H A D
good luck on the dyno this weekend,i think 585- 590 hp would be expected and i hope it goes to 600,this is a an extremely strong engine and at 10.5 :1 comp on pump gas with a HR cam is nothing short of amazing,big credit to all involved.
this is one of my favorite threads and i have read all 42 pages 3 times over,it has all the right ingredients-
FUN
FACTS
FICTION
i understand you will be busy on the dyno but some video footage would be greatly appreciated,looking forward to the post dyno dissection :D

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 10:25 am
by CGT
Well hopefully the dissection involves comparing numbers and not broken stuff. Im ready to be done with this engine and move on to something different...
And so is my '65'
Resized_20160605_165857001.jpg
Resized_20160605_170203001.jpg
Resized_20160605_170153001.jpg
Resized_20160605_165905001.jpg

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 11:48 am
by steve cowan
CGT wrote: Thu Nov 29, 2018 10:25 am Well hopefully the dissection involves comparing numbers and not broken stuff. Im ready to be done with this engine and move on to something different...
And so is my '65'
Resized_20160605_165857001.jpg
Resized_20160605_170203001.jpg
Resized_20160605_170153001.jpg
Resized_20160605_165905001.jpg
damn she is a sweet ride

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 1:07 pm
by novadude
That's a good looking chassis!

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 6:40 pm
by zums
Nice!
Tom

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 8:44 pm
by CGT
zums wrote: Thu Nov 29, 2018 6:40 pm Nice!
Tom
Thanks. Whats your 65 run?

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 9:41 pm
by zums
CGT wrote: Thu Nov 29, 2018 8:44 pm
zums wrote: Thu Nov 29, 2018 6:40 pm Nice!
Tom
Thanks. Whats your 65 run?
11.1 through full exhaust, 92 pump gas small vales, track has a 11 second roll cage rule, through me out after second run, id be a fool if i couldnt tune a few tenths with open exhaust, so i tagged it, nice stress relief machine, lol
Tom

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Nov 29, 2018 10:53 pm
by CGT
Stock suspenion? Auto?

Re: Another "How much will it make?" Project "Special Needs"

Posted: Fri Nov 30, 2018 2:35 pm
by zums
CGT wrote: Thu Nov 29, 2018 10:53 pm Stock suspenion? Auto?
Not completely, stock 6 cylinder springs in rear, South Side machine lower control arms so i can adjust pinion angle, i welded the top arms, and moroso springs in front, 350 turbo trans
Tom

Re: Another "How much will it make?" Project "Special Needs"

Posted: Fri Nov 30, 2018 6:41 pm
by CGT
Resized_20181130_152706.jpg
Resized_20181130_152716.jpg

Re: Another "How much will it make?" Project "Special Needs"

Posted: Sat Dec 01, 2018 7:32 am
by Carnut1
Looks great! Please take a video, we want to hear it! Thanks, Charlie

Re: Another "How much will it make?" Project "Special Needs"

Posted: Fri Dec 07, 2018 1:02 pm
by steve cowan
CGT wrote: Fri Nov 30, 2018 6:41 pm Resized_20181130_152706.jpgResized_20181130_152716.jpg
Hi C H A D,
How did SN go on the dyno? :D

Re: Another "How much will it make?" Project "Special Needs"

Posted: Fri Dec 07, 2018 3:39 pm
by CGT
It went well Steve. Well kinda. I have all the data in excel...thanks slo-svt. I've been reviewing it off and on. I'm real happy with the engine. Shoot me a PM with your email and I'll send some stuff your way. I can't figure out how post it on the forum.

Re: Another "How much will it make?" Project "Special Needs"

Posted: Thu Mar 07, 2019 1:58 am
by frankthetank
Any updates on the results on this? Just curious, thanks for sharing.