Oversize 50 mm roller cam bearing?
Moderator: Team
Oversize 50 mm roller cam bearing?
Machine shop bored cam tunnel to 2.286 . Is an oversize bearing available?
-
- Guru
- Posts: 1564
- Joined: Thu Sep 16, 2010 10:01 am
- Location: Virginia
- Contact:
Re: Oversize 50 mm roller cam bearing?
Don't know what motor you have but Dart has a 55mm BBC babbitt bearing that takes a 2.300" bore.
"do it right or do it right away"
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs
http://www.motionmachineinc.com/
https://www.youtube.com/watch?v=ZgIZbveknDs
Re: Oversize 50 mm roller cam bearing?
I would really like to stay 50mm roller bearing if it is possible? Block is motown. They have offered to by new block but would like to save this one.
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Re: Oversize 50 mm roller cam bearing?
At one time there was a baring available 2.300 housing bore check with CV Products.
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
Re: Oversize 50 mm roller cam bearing?
Thanks Carl. Do you happen to have a part number they are not on CV website?
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Re: Oversize 50 mm roller cam bearing?
It was years ago but you might check a local bearing ware house.blackflag wrote:Thanks Carl. Do you happen to have a part number they are not on CV website?
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole