New Vortec heads P/N 25534371
Moderator: Team
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
New Vortec heads P/N 25534371
I got 3 sets of these heads in 2 weeks ago and while being down in North Carolina for the last 10 days visiting shops that I do bussiness with to find out that GM has recalled them due to valve seats being to deep, And I called my GM rep to find out this is true. So anyone having these heads may want to send them back for a refund. And there is no news when they will be replaced.
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
-
- Guru
- Posts: 2650
- Joined: Sun Sep 05, 2004 6:38 pm
- Location: salt lake city, ut
- Contact:
- Wolfplace
- Guru
- Posts: 3580
- Joined: Fri Sep 24, 2004 10:39 pm
- Location: Mendocino County, Northern CA
- Contact:
=bill jones wrote:-do you have the casting numbers available?
-I have a set of heads casting #12558062 that I'm wondering about.
Thanks...
Bill, don't know the casting # but that's the new 206cc port "performance" Vortec that comes bare from GM.
=
Carl,
Thanks for the info I just had a customer that was fixin to buy a set.
Mike
Lewis Racing Engines
4axis CNC block machining
A few of the cars I have driven & owned
A tour of my shop
The Dyno
And a few pics of the gang
"Life is tough. Life is even tougher if you're stupid"
John Wayne
Lewis Racing Engines
4axis CNC block machining
A few of the cars I have driven & owned
A tour of my shop
The Dyno
And a few pics of the gang
"Life is tough. Life is even tougher if you're stupid"
John Wayne
-
- Guru
- Posts: 2650
- Joined: Sun Sep 05, 2004 6:38 pm
- Location: salt lake city, ut
- Contact:
-Mike,,,,This set I got are the raised about .100" intake ports cast iron 350 Chevy heads, and I've had them maybe 6 months, sent to me from a friend.
-I'm just now getting ready to start on them so this could save us a lot of trouble if we find out they are the problem heads.
-------------------------------------------
-Which head is the 206 CC port head? mine or the heads that this thread is about?
-I'm just now getting ready to start on them so this could save us a lot of trouble if we find out they are the problem heads.
-------------------------------------------
-Which head is the 206 CC port head? mine or the heads that this thread is about?
- Wolfplace
- Guru
- Posts: 3580
- Joined: Fri Sep 24, 2004 10:39 pm
- Location: Mendocino County, Northern CA
- Contact:
The 206cc is the one this thread is about. It is pretty new & is a large port Vortec GM came out with not a producton head & I believe it has the BowTie logo cast into it
The 062 you have is a standard Vortec.
The 062 you have is a standard Vortec.
Mike
Lewis Racing Engines
4axis CNC block machining
A few of the cars I have driven & owned
A tour of my shop
The Dyno
And a few pics of the gang
"Life is tough. Life is even tougher if you're stupid"
John Wayne
Lewis Racing Engines
4axis CNC block machining
A few of the cars I have driven & owned
A tour of my shop
The Dyno
And a few pics of the gang
"Life is tough. Life is even tougher if you're stupid"
John Wayne
-
- Guru
- Posts: 2650
- Joined: Sun Sep 05, 2004 6:38 pm
- Location: salt lake city, ut
- Contact: