USA made BAM solid roller lifters
Moderator: Team
USA made BAM solid roller lifters
I saw a listing on EBAY for solid roller lifters from COBRAPOWEMARINE for: SBC, FORD, CHEVY,CHRYSLER, and, AMC ! Anyone know who is making them? Are they any good? They are priced around $500 dollars a set. Thanks Terry
Re: USA made BAM solid roller lifters
I did a search for "Bam Products" it is ownend by Brad Miller .....he was director of maufacturing engineering@ Crane Cams from 1996-2009 and they are located in Ormond Beach Florida! I can not find a source for a catalog yet.
Re: USA made BAM solid roller lifters
Seen these too........look like a great design ....what do you mean short lived Chris?
-
- Pro
- Posts: 287
- Joined: Wed Sep 03, 2014 2:01 am
- Location:
Re: USA made BAM solid roller lifters
Sometimes being an arrogant smartass is not the best approach.
-
- HotPass
- Posts: 3445
- Joined: Sat Feb 23, 2013 5:42 pm
- Location:
Re: USA made BAM solid roller lifters
It would be nice if he elaborated, since everyone knows his connection to Morel.Charliesauto wrote: ↑Wed May 23, 2018 6:33 pmSometimes being an arrogant smartass is not the best approach.
-Bob
- Super_Stock
- Member
- Posts: 110
- Joined: Sun May 09, 2021 7:30 am
- Location: OverThere
Re: USA made BAM solid roller lifters
The BAM Dlc steel lifter look's to be the ULTIMATE lifter, have not seen one fail YET.
Has anyone seen one fail?
Has anyone seen one fail?
-
- Expert
- Posts: 705
- Joined: Mon Aug 25, 2008 9:38 pm
- Location:
Re: USA made BAM solid roller lifters
I have BAM rollers with bearings in two builds, which are giving good service. the lash is always spot on.
Larry Woodfin - Team Woodfin Racing - Owner, Woodfin Automotive
Re: USA made BAM solid roller lifters
For 500 those have to be needle bearings. Regardless I would call Brad he is a good guy!
- Super_Stock
- Member
- Posts: 110
- Joined: Sun May 09, 2021 7:30 am
- Location: OverThere
-
- Guru
- Posts: 1595
- Joined: Mon Sep 21, 2009 11:58 pm
- Location: tenn
Re: USA made BAM solid roller lifters
i have 2 race only engines running them. One has 800 lbs on nose, other is 1200 lbs on nose. Been a while running but neither customer has called me about a problem but I paid well over $500 for them
reed
reed
-
- Member
- Posts: 56
- Joined: Wed Jul 29, 2009 4:02 am
- Location:
Re: USA made BAM solid roller lifters
Well depending on when you bought them I would imagine that you did pay more than $500 considering the thread is 9 years old?racear2865 wrote: ↑Sat Jun 18, 2022 8:30 pm i have 2 race only engines running them. One has 800 lbs on nose, other is 1200 lbs on nose. Been a while running but neither customer has called me about a problem but I paid well over $500 for them
reed