valve lash solid roller iron block alum heads
Moderator: Team
3 posts
• Page 1 of 1
valve lash solid roller iron block alum heads
by themotorshop » Wed Aug 15, 2012 1:07 pm
any suggestions on cold setting for solid roller, by crane, with alum head, iron block, iam thinking .004 in&ex
- themotorshop
- New Member
- Posts: 24
- Joined: Sat Feb 26, 2011 8:20 pm
Re: valve lash solid roller iron block alum heads
by Wolfplace » Wed Aug 15, 2012 1:10 pm
themotorshop wrote:any suggestions on cold setting for solid roller, by crane, with alum head, iron block, iam thinking .004 in&ex
Any particular engine?
If a BB Chevy .006-.007 will come very close
SB .004-.005 same deal
Mike (Wolfplace)
VISIT US AT
Lewis Racing Engines
Complete 4axis CNC block machining
=======
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----
VISIT US AT
Lewis Racing Engines
Complete 4axis CNC block machining
=======
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----
-
Wolfplace - Guru
- Posts: 2956
- Joined: Fri Sep 24, 2004 9:39 pm
- Location: Mendocino County, Northern CA
Re: valve lash solid roller iron block alum heads
by themotorshop » Wed Aug 15, 2012 2:10 pm
sorry to not mention BB chevy, i set them at .005, thanks very much for the info,JRD.
- themotorshop
- New Member
- Posts: 24
- Joined: Sat Feb 26, 2011 8:20 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bing [Bot], Brian B, cpmotors, Google [Bot], lorax, mjtorb, motorking, Mr 408, nickmckinney, raynorshine, RCSmith, turbodart, Yahoo [Bot], yota1280 and 24 guests