Page 1 of 1
Dart 305 block
Posted: Sun Jun 10, 2012 9:10 pm
by mnmatt
I called Dart and they had problems at the foundry and they wont be ready for some time. Has anyone gotten any or had troubles getting them?
Re: Dart 305 block
Posted: Sun Jun 10, 2012 10:28 pm
by ProPower engines
What is the application?????????
Street, Race, Marine........................................
I was not aware that Dart was going to produce a 305inch block.
Re: Dart 305 block
Posted: Sun Jun 10, 2012 10:53 pm
by mnmatt
Race, it's an SHP version. I called them and they said they were having problems casting the blocks because they were making running changes to the original SHP core box to allow the smaller bore of the 305.
Re: Dart 305 block
Posted: Sun Jun 10, 2012 10:54 pm
by dirtracr5
what happened to your motor sat matt? didnt sound good.
Re: Dart 305 block
Posted: Mon Jun 11, 2012 11:52 pm
by mnmatt
Broke the cam behind the 4th journal.
Re: Dart 305 block
Posted: Tue Jun 12, 2012 1:36 am
by ProPower engines
Been there and it sucks.
Takes out lots of parts.Sounds like time to upgrade to a better quality P55 cam core.That and take a look at the valve spring package you are running if it is a cast cam core