Jones Cam Design
Moderator: Team
Re: Jones Cam Design
Is it my Birthday or something ????
Thanks everyone. Check's in the mail.
Thanks everyone. Check's in the mail.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Re: Jones Cam Design
Just telling it like it is Mike. I will cash the check though!
Mack Johnson
'86 Mustang Footbraker
Pump gas 347
6.435 @ 104
'86 Mustang Footbraker
Pump gas 347
6.435 @ 104
Re: Jones Cam Design
I don't need a check, just send me that bigger cam you were recommending.
74 Nova
SBC 406
3267 pounds
Speierracing heads
60 1.29 (10/15)
1/8 6.06@110 (10/15)
Best 9.87@131 on the rev limitor 1 Feb 2013
SBC 406
3267 pounds
Speierracing heads
60 1.29 (10/15)
1/8 6.06@110 (10/15)
Best 9.87@131 on the rev limitor 1 Feb 2013
Re: Jones Cam Design
that Mike Jones guy does grind some nasty cams indeed, but I have been told he is an ugly dude telling bad jokes and likes that strange Denver beer we use to clean our beer bottles with................sometimes. And if he would not be so much of an chicken he would fly over and watch the 24 hours of Le Mans with me..........
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: Jones Cam Design
coolchevy, I am glad I can put a picture to the name!! That is bad a$$ period!!
GURU is only a name.
Adam
Adam
Re: Jones Cam Design
Those are some nice air conditioning ducts.coolchevy wrote:
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
Jones Cam Designs' HotPass Vendors Forum: viewforum.php?f=44
(704)489-2449
-
- Member
- Posts: 184
- Joined: Fri Nov 06, 2009 1:56 pm
- Location: London UK
Re: Jones Cam Design
Just a balanced view, I bought a $500 jones cam to here in the UK, but unfortunely its sitting in a box in my garage because it got betten by a off the shelf girly crower cam by 100ftlbs tq with the same topend.
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: Jones Cam Design
I could see that happening using the same valve springs for the girly cam on the solid roller.Sky rocket wrote:Just a balanced view, I bought a $500 jones cam to here in the UK, but unfortunely its sitting in a box in my garage because it got betten by a off the shelf girly crower cam by 100ftlbs tq with the same topend.
GURU is only a name.
Adam
Adam
-
- Member
- Posts: 184
- Joined: Fri Nov 06, 2009 1:56 pm
- Location: London UK
- sheppard00
- Member
- Posts: 83
- Joined: Sun Jun 19, 2005 6:39 pm
- Location: Texas
Re: Jones Cam Design
your sig still say's mike jones cam
mark sheppard
I may not know, but I can find someone that does.
I may not know, but I can find someone that does.
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: Jones Cam Design
I remember this. You asked Jones for a cam to use on an IR induction system, then your engine builder tested cams with and single 4BBL carb and intake. (concluding that his (your engine builder) choice of cams was superior to the Jones cam even though the application was different)Sky rocket wrote:Just a balanced view, I bought a $500 jones cam to here in the UK, but unfortunely its sitting in a box in my garage because it got betten by a off the shelf girly crower cam by 100ftlbs tq with the same topend.
No batter bats 1000, but it's unusual for Jones not to produce a very good performing cam for a specific application.
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit
-
- Expert
- Posts: 940
- Joined: Tue Mar 06, 2007 1:59 pm
- Location: BC, Canada
Re: Jones Cam Design
oh ya, thats right! nothing like moving the goal postsKeith Morganstein wrote:I remember this. You asked Jones for a cam to use on an IR induction system, then your engine builder tested cams with and single 4BBL carb and intake. (concluding that his (your engine builder) choice of cams was superior to the Jones cam even though the application was different)Sky rocket wrote:Just a balanced view, I bought a $500 jones cam to here in the UK, but unfortunely its sitting in a box in my garage because it got betten by a off the shelf girly crower cam by 100ftlbs tq with the same topend.
No batter bats 1000, but it's unusual for Jones not to produce a very good performing cam for a specific application.
Use it up
Wear it out
Eat it all!
-the greatest..."Dale Armstrong"
Wear it out
Eat it all!
-the greatest..."Dale Armstrong"
-
- Guru
- Posts: 1500
- Joined: Thu Sep 03, 2009 6:06 pm
- Location: Dripping Springs, Texas
Re: Jones Cam Design
No one hits the mark every single time but I thought I remembered the thread going along those lines too. Not exactly apples to apples.
Live in such a way that those who know you but don't know God will come to know God because they know you.