SATURN DOHC 1.9 PERFORMANCE CAMS??

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Post Reply
MONTESS87
New Member
New Member
Posts: 6
Joined: Sat Oct 22, 2011 8:52 pm
Location: Amston, Connecticut

SATURN DOHC 1.9 PERFORMANCE CAMS??

Post by MONTESS87 »

HI, DOES ANYONE HERE KNOW WHO MAKES PERFORMANCE CAMSHAFTS FOR A 1997 SATURN 1.9 DOHC 5 SPD??
6sally6
Expert
Expert
Posts: 623
Joined: Sat Jan 30, 2010 12:01 am
Location:

Re: SATURN DOHC 1.9 PERFORMANCE CAMS??

Post by 6sally6 »

You can get a custom ground cam for what you would pay for an off-the-shelf "big name" cam.....maybe LESS money. You tell'em what you want and they throw out a few suggestions and then grind it up.
6sally6
sc2dave
Expert
Expert
Posts: 635
Joined: Tue May 24, 2005 10:45 pm
Location: Los Angeles, in The People's republic of Kalifornia

Re: SATURN DOHC 1.9 PERFORMANCE CAMS??

Post by sc2dave »

deltacam.com, if not, i believe you can use 2 INT. cams. go to www.saturnfans.com and ask there about this mod.
DaveMcLain
Guru
Guru
Posts: 2858
Joined: Thu Jan 06, 2011 8:57 am
Location:

Re: SATURN DOHC 1.9 PERFORMANCE CAMS??

Post by DaveMcLain »

You could probably find out something from someone who runs one of these in a circle track application. Another option would be to talk to Steve Demos(Demos' Cams). He has some profiles that were developed for a Ferrari race team and that are designed to work with a direct acting flat tappet(bucket) setup. You would be reducing the base circle slightly but there might be enough travel in the lifter to make up the difference.
Post Reply