main bolt to stud, line hone?
Moderator: Team
- colormebad
- Member
- Posts: 144
- Joined: Tue May 12, 2009 12:05 am
- Location: Corinth Ms
- Contact:
Re: main bolt to stud, line hone?
Your a joke straight out of a comic book! Your fussin just like a woman & that leads us to just take this to the jerry springer show...
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Re: main bolt to stud, line hone?
I call a spade a spade and an ace an ace and I can tell when some is a bullshyt artistcolormebad wrote:Your a joke straight out of a comic book! Your fussin just like a woman & that leads us to just take this to the jerry springer show...
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
- colormebad
- Member
- Posts: 144
- Joined: Tue May 12, 2009 12:05 am
- Location: Corinth Ms
- Contact:
Re: main bolt to stud, line hone?
I just uploaded this video to youtube not long ago' doing a little prime & checking out the oiling system on my on setup....I guess you will say this drill im using is turning the wrong direction & not enough RPM cause i didn't have to have a line hone done on the block after going from bolts to studs...
http://www.youtube.com/watch?v=HFlpAXEa ... ure=search
http://www.youtube.com/watch?v=HFlpAXEa ... ure=search
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: main bolt to stud, line hone?
colormebad wrote:I just uploaded this video to youtube not long ago' doing a little prime & checking out the oiling system on my on setup....I guess you will say this drill im using is turning the wrong direction & not enough RPM cause i didn't have to have a line hone done on the block after going from bolts to studs...
http://www.youtube.com/watch?v=HFlpAXEa ... ure=search
Did I miss something?
What does priming have to do with line honing?
GURU is only a name.
Adam
Adam
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Re: main bolt to stud, line hone?
WOW priming an engine, I guess he is the only one that primes an engine Probably his first engine or its some one eleses vidieoaf2 wrote:colormebad wrote:I just uploaded this video to youtube not long ago' doing a little prime & checking out the oiling system on my on setup....I guess you will say this drill im using is turning the wrong direction & not enough RPM cause i didn't have to have a line hone done on the block after going from bolts to studs...
http://www.youtube.com/watch?v=HFlpAXEa ... ure=search
Did I miss something?
What does priming have to do with line honing?
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
- colormebad
- Member
- Posts: 144
- Joined: Tue May 12, 2009 12:05 am
- Location: Corinth Ms
- Contact:
Re: main bolt to stud, line hone?
I tell you what i what! I will post another video later in my shop in front of the new engine/in my car im putting together & i will hold a sign up with ur name on it saying line hone queen....
ps: maby i will bring down a few bullet friends later on to talk some smack with ya also...
ps: maby i will bring down a few bullet friends later on to talk some smack with ya also...
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: main bolt to stud, line hone?
colormebad wrote:
ps: maby i will bring down a few bullet friends later on to talk some smack with ya also...
I now know who this is lol
GURU is only a name.
Adam
Adam
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Re: main bolt to stud, line hone?
Once upon a time this was a serious forum for serious discussion. Started by a very respected NASCAR engine builder. It discussion among professionals that have spent their whole lives trying to be the best they could at building and improving engines. There were also some very smart non-professionals that contributed in a thoughtful way. Along with that were interested, respectful and enthusiastic racers / hot-rodders that asked questions and everyone tried to help them. (For free, on their own time, during their breaks, etc...). Now come the wise guys that just want to pi$$ in the sandbox. What a shame.
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit
Re: main bolt to stud, line hone?
AMEN!
Felix, qui potuit rerum cognscere causas.
Happy is he who can discover the cause of things.
Happy is he who can discover the cause of things.
- needforspeed66gt
- Guru
- Posts: 2069
- Joined: Sat May 06, 2006 6:18 pm
- Location: California
Re: main bolt to stud, line hone?
Keith Morganstein wrote:Once upon a time this was a serious forum for serious discussion. Started by a very respected NASCAR engine builder. It discussion among professionals that have spent their whole lives trying to be the best they could at building and improving engines. There were also some very smart non-professionals that contributed in a thoughtful way. Along with that were interested, respectful and enthusiastic racers / hot-rodders that asked questions and everyone tried to help them. (For free, on their own time, during their breaks, etc...). Now come the wise guys that just want to pi$$ in the sandbox. What a shame.
+1
Nate @steeldustmachine
Engine Machinist
Engine Machinist
- af2
- Guru
- Posts: 7014
- Joined: Sun Jan 28, 2007 4:42 pm
- Location: Grass Valley, CA :Northern Foothills
Re: main bolt to stud, line hone?
+3
Thanks Keith for bringing this out. It has been a trend in the last year.
Thanks Keith for bringing this out. It has been a trend in the last year.
GURU is only a name.
Adam
Adam
Re: main bolt to stud, line hone?
X10
I kinda thought about making a thread about this but I thought it was maybe just me.
I kinda thought about making a thread about this but I thought it was maybe just me.
Re: main bolt to stud, line hone?
Carl, You know my opinion on $hit like this however I have to agree he is a phucking a$$hole.CNC BLOCKS wrote:WOW priming an engine, I guess he is the only one that primes an engine Probably his first engine or its some one eleses vidieoaf2 wrote:colormebad wrote:I just uploaded this video to youtube not long ago' doing a little prime & checking out the oiling system on my on setup....I guess you will say this drill im using is turning the wrong direction & not enough RPM cause i didn't have to have a line hone done on the block after going from bolts to studs...
http://www.youtube.com/watch?v=HFlpAXEa ... ure=search
Did I miss something?
What does priming have to do with line honing?
I guess we can count that Dart block as #1 and #199 when he has to rebuild them everytime
- colormebad
- Member
- Posts: 144
- Joined: Tue May 12, 2009 12:05 am
- Location: Corinth Ms
- Contact:
Re: main bolt to stud, line hone?
We all know who the one person in here is ' that wants to act like hes god and better than anyone else at what he does...I came in here and was saying what i know 100% about the line hone's i have seen and he starts on me...I have seen in lots & lots of forums where he does this to lots of people...Here below is 1 instance....From 1 of many forums he always starts with every new person....Here below is what im talking about..
Yes there is a point to this Carl takes stuff from one form to a different form and cuts it down. He could just as easy do it to any one here on TC. We post our pictures and questions with the hope people would enjoy it/them and get some feed back from them. Not copy the pictures and run to a different form and cut it down. Behind our back. Not with so much as a PM, or hey Mike some thing don't look right. Can I talk to you about it. He's a machinist/supplier and I'm a consumer.
Oh did I say I didn't bring up this subject on this thread. Carl brought it up. Not I.
ps: I have better things to do than argue with this freak wana be....I can tell you right now boy! You want ever be better than me....Back to the other forums that treat people with respect and dont try and act like they better than everyone else.....Later.....
Yes there is a point to this Carl takes stuff from one form to a different form and cuts it down. He could just as easy do it to any one here on TC. We post our pictures and questions with the hope people would enjoy it/them and get some feed back from them. Not copy the pictures and run to a different form and cut it down. Behind our back. Not with so much as a PM, or hey Mike some thing don't look right. Can I talk to you about it. He's a machinist/supplier and I'm a consumer.
Oh did I say I didn't bring up this subject on this thread. Carl brought it up. Not I.
ps: I have better things to do than argue with this freak wana be....I can tell you right now boy! You want ever be better than me....Back to the other forums that treat people with respect and dont try and act like they better than everyone else.....Later.....
-
- HotPass
- Posts: 9397
- Joined: Tue Nov 22, 2005 5:41 am
- Location:
Re: main bolt to stud, line hone?
So,
Does anyone have any experience or remember differences between fretting issues with blocks that had studs installed when new versus used blocks that had bolts previously ? It sounds like an experiment that would be cool to set up with some fleet engines.
Does anyone have any experience or remember differences between fretting issues with blocks that had studs installed when new versus used blocks that had bolts previously ? It sounds like an experiment that would be cool to set up with some fleet engines.
https://www.semasan.com/breaking-news-archives?utm_campaign=DrivingForce_DF272&utm_content=SeeAllLeg