I need a photo of the front of a KRP or Pontiac Super Duty Block. Also the 2.5R block is the same. I'm mainly needing the front main area, around both sides of the timming chain. If someone has a block, I'd REALLY appreciate a photo.
THANKS
Chad
cspeier@media-net.net
Anyone have a picture of a Pontiac Super Duty 4 cylinder?
Moderator: Team
-
- Vendor
- Posts: 3660
- Joined: Sat Feb 14, 2004 4:04 pm
- Location: Abbeville, LA
- Contact:
-
- Vendor
- Posts: 3660
- Joined: Sat Feb 14, 2004 4:04 pm
- Location: Abbeville, LA
- Contact:
Chad- I don't have a hard copy of that book but do have on computer without internet access in a PDF file but is too big to save and send. On page 26 I think in mine is a detailed schematic of the front of the block (and other views with dimensions). Perhaps Larry could scan that for you. That book is out of print as far as I know as I have tried to get one. I can print it and send to you if you like. PM or email me an address.
Jack
Jack
Gerry at KRP Kansas Racing Products can answer your questions. They make the Severe duty blocks there. They do alot of things with these blocks to meet different needs.........dry sumps, types of accessories, ect. The ones I've seen will work but if you have a rule they will notice it. The mains in those stock blocks are sure junk.
-
- Vendor
- Posts: 3660
- Joined: Sat Feb 14, 2004 4:04 pm
- Location: Abbeville, LA
- Contact:
Hotrod Magazine and Pontiac Performance Plus magazine (Fiero)
(c)1985 Pontiac Motor Division
John Baechtel
Is this it
http://cgi.ebay.com/ebaymotors/Pontiac- ... dZViewItem
probably is the same ..Cover looks different than mine .
(c)1985 Pontiac Motor Division
John Baechtel
Is this it
http://cgi.ebay.com/ebaymotors/Pontiac- ... dZViewItem
probably is the same ..Cover looks different than mine .