Page 1 of 1
BBC square port intake on oval heads
Posted: Wed May 06, 2009 7:18 pm
by jobes
I have heard that there is some power running a square port intake on oval port heads.Any body do this? Does it work? This is a drag race effort no street.468 cid roller 12.5 to 1.Thanks in advance as always!I appreciate all the wisdom!
Posted: Wed May 06, 2009 7:53 pm
by Speedbump
Good thread a few months ago and before that even. Use the search function for rectangular port and oval port and you'll get lots of hits and lots of reading.
Posted: Wed May 06, 2009 8:02 pm
by bigjoe1
I saw it with my own eyes back about 35 or 40 years ago-- Square port tunnelram on oval port heads, car picked up 7 or 10 MPH in the quarter-- I worked at Edelbrock at the time, they all said it should NOT even run, let alone pick up 100 HP
JOE SHERMAN RACING
Posted: Wed May 06, 2009 8:08 pm
by sleeper sedan
This is a thread I had started some time back... There are a few references in regards to what you're asking, you might PM those members to get more information.
viewtopic.php?t=9684&highlight=
Clark