General engine tech -- Drag Racing to Circle Track
I have heard that there is some power running a square port intake on oval port heads.Any body do this? Does it work? This is a drag race effort no street.468 cid roller 12.5 to 1.Thanks in advance as always!I appreciate all the wisdom!
- Posts: 137
- Joined: Sat Aug 09, 2008 6:43 pm
Good thread a few months ago and before that even. Use the search function for rectangular port and oval port and you'll get lots of hits and lots of reading.
"If it was easy, everybody would do it."
- Posts: 1088
- Joined: Thu Nov 22, 2007 10:53 am
- Location: AZ
I saw it with my own eyes back about 35 or 40 years ago-- Square port tunnelram on oval port heads, car picked up 7 or 10 MPH in the quarter-- I worked at Edelbrock at the time, they all said it should NOT even run, let alone pick up 100 HP
JOE SHERMAN RACING
- Show Guest
- Posts: 5890
- Joined: Thu Aug 24, 2006 7:16 pm
- Location: santa ana calif-92703
This is a thread I had started some time back... There are a few references in regards to what you're asking, you might PM those members to get more information.
http://speedtalk.com/forum/viewtopic.ph ... highlight=
The difference between genius and stupidity is that genius has it's limits. Albert Einstein
- Posts: 226
- Joined: Mon Jan 01, 2007 7:59 pm
- Location: Independence, MO
Return to Engine Tech
Who is online
Users browsing this forum: 202ci EH, Bob Eiler, Google [Bot], MaxFlow, MTENGINES, sam-missle, Sir Yun, Yahoo [Bot] and 16 guests