Hello all,
I am looking for a source for the dimentions for all the assorted AN fittings. I ran a search on this board and the WWW with no luck. I tried Earls, etc. I am looking for the OAL, CTR to CTR dimentions etc. I thought I had it in a book here but no luck.
Thanks in advance.
PFM
AN Fittings Dimentions
Moderator: Team
Npt sure if will have all you need but go to Aeroquip website and download or look at the catalog pages 47-48 I think have some dimensions but there are lots of other info in there. See if this link works takes you direct:
http://www.aeroquip.com/media/A-SPPE-MC0001-E.pdf
http://www.aeroquip.com/media/A-SPPE-MC0001-E.pdf
-
- Pro
- Posts: 362
- Joined: Fri Jun 18, 2004 11:08 pm
- Location:
-
- Vendor
- Posts: 11003
- Joined: Mon Apr 11, 2005 2:30 am
- Location: CA
If you are looking for the port dimensions, try this:
http://www.schmidtmotorworks.com/AN_fittings.html
http://www.schmidtmotorworks.com/AN_fittings.html
Thanks all,
Still no luck with what I need. No JIC catalog I found had dimentions for how long a -8 fitting was, how close together two could be placed back to back? How long is a -? T on the long side? You know the stuff you need to know without buying one of everything to do a cut and try.
Thanks for those who offered help.
PFM
Still no luck with what I need. No JIC catalog I found had dimentions for how long a -8 fitting was, how close together two could be placed back to back? How long is a -? T on the long side? You know the stuff you need to know without buying one of everything to do a cut and try.
Thanks for those who offered help.
PFM