Darin Morgan Pro-Stock Ford Head......
Moderator: Team
Darin Morgan Pro-Stock Ford Head......
Theres a rumor that your going to be building a new ford pro-stock head for NHRA. Is this something you can say anything about yet?
Last edited by fordhemi on Sun Oct 26, 2008 8:15 am, edited 1 time in total.
-
- Guru
- Posts: 1393
- Joined: Wed Feb 20, 2008 10:43 pm
- Location: Colleyville, TX
-
- Show Guest
- Posts: 1095
- Joined: Tue Nov 02, 2004 10:56 am
- Location: Arlington Texas
- Contact:
Yes, its happening
Since the word is out, I thought I should comment so the rumors don't get totally out of hand and cuase problems. First off, FORD IS NOT SPENDING ANY MONEY ON THIS DEAL!. Its all privately funded from other entities who will remain anonymous at least until they deem it necessary to make them self's known. The funds are there, the thing is a GO and progress is being made. Anything this complex takes a team of individuals and companies to pull off not to mention a lot of time to complete. Its not going to happen over night and its not going to happen in a year. It might take a year and half before everything is completed.
P.S. Please, everyone just hold up on the rumors and let this thing happen. The announcements will be forth coming and the details will trickle out as the powers that be deem necessary, but not until. No, I cant comment any further on this other than what I have already stated so please don't post asking for more info because I cant give it.
P.S. Please, everyone just hold up on the rumors and let this thing happen. The announcements will be forth coming and the details will trickle out as the powers that be deem necessary, but not until. No, I cant comment any further on this other than what I have already stated so please don't post asking for more info because I cant give it.
Darin Morgan
-Induction Research and Development
-EFI Calibration and Tuning
Reher Morrison Racing Engines
1120 Enterprise Place
Arlington Texas 76001
Phone 817-467-7171
Cell 682-559-0321
http://www.rehermorrison.com
-Induction Research and Development
-EFI Calibration and Tuning
Reher Morrison Racing Engines
1120 Enterprise Place
Arlington Texas 76001
Phone 817-467-7171
Cell 682-559-0321
http://www.rehermorrison.com
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
-
- Guru
- Posts: 5566
- Joined: Sun Feb 19, 2006 10:19 am
- Location: MA
Yes, it's the hemi head that wins most of the time in IHRA. So dominant that they gave the head to Sonny who fit it into the BBC so they could be somewhat competitive.fordhemi wrote:Is that head not for the old hemi engine? I dont think the old boss hemi engine can be run in NHRA.....
Automotive Machining, cylinder head rebuilding, engine building. Can't seem to quit
Thats what I thought. As far as I know the old hemi engine is not approved to run in the NHRA. Thats what billy glidden said a few months ago. He said that before he started to run pro-stock with the GTO he ask the NHRA if he could run one of his dads old hemis and they said no because it was not approved for NHRA competition. It could be now I dont know.Keith Morganstein wrote:Yes, it's the hemi head that wins most of the time in IHRA. So dominant that they gave the head to Sonny who fit it into the BBC so they could be somewhat competitive.
The real problem with running one of his dads old Hemis is the fact that he would have to run a BUNCH more Nitrous than what he was running to get into the 6 second club back in the late 90s. I don't think he would get away with it this time though.fordhemi wrote:Thats what I thought. As far as I know the old hemi engine is not approved to run in the NHRA. Thats what billy glidden said a few months ago. He said that before he started to run pro-stock with the GTO he ask the NHRA if he could run one of his dads old hemis and they said no because it was not approved for NHRA competition. It could be now I dont know.