These blocks have a radius cut in the register which is good but they never beveled the 3 center caps to fit the radius and damaged that area pretty good and they had a burr on the cap and still installed it damaging the side of the register as well. Hope this is clear enough?
BE AWARE OF THE CNC BOW-TIE BLOCK THEY MAY HAVE DAMAGE (PIC)
Moderator: Team
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
BE AWARE OF THE CNC BOW-TIE BLOCK THEY MAY HAVE DAMAGE (PIC)
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole