Giving a talk on cam selection, and need your input

General engine tech -- Drag Racing to Circle Track

Moderator: Team

Warp Speed
Guru
Guru
Posts: 2664
Joined: Wed Jun 25, 2008 1:46 pm
Location: NC

Re: Giving a talk on cam selection, and need your input

Post by Warp Speed » Fri Aug 10, 2018 12:35 pm

CamKing wrote:
Fri Aug 10, 2018 10:02 am
Warp Speed wrote:
Fri Aug 10, 2018 6:59 am
CamKing wrote:
Thu Aug 09, 2018 2:03 pm
I'll be giving a talk on cam selection, and need some help.
What questions need to be covered?
What common mistakes do people make?
What would you like to learn about cam selection?
What day are you doing this?
Not sure yet.
You planning on sitting in the back of the room, and shooting spit balls at me ? :lol:
Well, now that you mentioned it............ :twisted: hahaha
I think that place is about 5 minutes from my house. Thought I might swing by and check it out at some point.

User avatar
CamKing
Guru
Guru
Posts: 8595
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Re: Giving a talk on cam selection, and need your input

Post by CamKing » Fri Aug 10, 2018 12:39 pm

Warp Speed wrote:
Fri Aug 10, 2018 12:35 pm

Well, now that you mentioned it............ :twisted: hahaha
I think that place is about 5 minutes from my house. Thought I might swing by and check it out at some point.
I was just told, I would be speaking at 3pm on Friday Oct. 5th, but that's subject to change.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
(704)489-2449

User avatar
CamKing
Guru
Guru
Posts: 8595
Joined: Wed Aug 08, 2007 4:05 pm
Location: Denver, NC
Contact:

Re: Giving a talk on cam selection, and need your input

Post by CamKing » Sat Aug 11, 2018 11:44 am

Someone else will be giving a talk on valve train dynamics, so I probably will stay away from that topic.
Mike Jones
Jones Cam Designs
Denver, NC
jonescams@bellsouth.net
http://www.jonescams.com
(704)489-2449

David Redszus
Guru
Guru
Posts: 6475
Joined: Tue Nov 27, 2007 9:27 am
Location: Chicago
Contact:

Re: Giving a talk on cam selection, and need your input

Post by David Redszus » Tue Aug 14, 2018 11:23 am

Cam shaft lobe derivatives; their purpose and function.

Designing cam lobes for intake vs exhaust. NA vs forced induction.

A camshaft parameter sensitivity analysis; which parameters are most critical?

plovett
Expert
Expert
Posts: 651
Joined: Sat Dec 30, 2006 3:49 pm
Location: Kansas City

Re: Giving a talk on cam selection, and need your input

Post by plovett » Tue Aug 14, 2018 1:25 pm

David Redszus wrote:
Tue Aug 14, 2018 11:23 am

Designing cam lobes for intake vs exhaust.
This.

JMO,

paulie

Post Reply