Rod Side Clearance

General engine tech -- Drag Racing to Circle Track

Moderator: Team

pamotorman
Guru
Guru
Posts: 2288
Joined: Thu Mar 06, 2014 11:55 pm

Re: Rod Side Clearance

Post by pamotorman » Fri May 19, 2017 7:02 pm

I freshen a BBC that was run at Daytona that had .045 side clearance with no problems.

liqu
New Member
New Member
Posts: 28
Joined: Sun Apr 05, 2015 1:22 pm

Re: Rod Side Clearance

Post by liqu » Fri May 19, 2017 8:15 pm

Thanks, I try a lot of things some work some don't (a lot don't) but I keep swinging the bat, I learned a long time ago if you do what everyone else does you run like everyone else.

Cliff

User avatar
Baprace
Guru
Guru
Posts: 1584
Joined: Sun Aug 06, 2006 4:57 am
Location: Henrietta NY 14623

Re: Rod Side Clearance

Post by Baprace » Sat May 20, 2017 1:39 am

pamotorman wrote:I freshen a BBC that was run at Daytona that had .045 side clearance with no problems.
What track did it run ? Was that a dirt engine ? Why so much side clearance, the one I had just pounded the crap out of the spiral locks. [-o<

Post Reply