Search found 78 matches
- Sun Sep 03, 2017 11:00 am
- Forum: Engine Tech
- Topic: Air fuel ratio 02 sensors for data
- Replies: 88
- Views: 17425
Air fuel ratio 02 sensors for data
Have a nitrous BBC lookin at adding O2 sensors for better tuning at track and being more consistent run to run , do not have a Race Pak in car so looking at some of the data recording O2 sensors from big stuff3 and altronics? anyone running or using any thing like this ? pros? cons? Any advice would...
- Sun Sep 03, 2017 10:56 am
- Forum: Chassis / Suspension / Body
- Topic: parachute equipment
- Replies: 1
- Views: 3921
parachute equipment
Looking for input on parachutes and equipment for mount etc. 130+ mph car in the 1/8th needing parachute information which one is better than others and why which one to buy? air launcher or manual style?spring assist? many choices just wondering what some of you are using with success or wish you h...
- Tue Apr 18, 2017 9:12 pm
- Forum: Engine Tech
- Topic: 565 BBC manifold choices
- Replies: 15
- Views: 3080
565 BBC manifold choices
Building a 565 BBC pump gas built
9.8 dart block
Afr 357 heads
10.8 to 1
4.600 bore
4.250 stroke
270 ish 280ish
112 is
108ic
Looking for a manifold choice for direct port now
2927 sniper or 2896 thoughts ? wasn't sure if the velocity would support the 2896 intake
9.8 dart block
Afr 357 heads
10.8 to 1
4.600 bore
4.250 stroke
270 ish 280ish
112 is
108ic
Looking for a manifold choice for direct port now
2927 sniper or 2896 thoughts ? wasn't sure if the velocity would support the 2896 intake
- Fri Jan 15, 2016 11:36 pm
- Forum: Engine Tech
- Topic: valve centerline layout dimensions
- Replies: 0
- Views: 364
valve centerline layout dimensions
Looking for some dimensional locations to bore centerline for a cylinder head with a 58/125 valve centerline. Thanks
- Thu Jan 14, 2016 8:14 pm
- Forum: Engine Tech
- Topic: 880 sbc block 4 bolt main install?
- Replies: 16
- Views: 5495
Re: 880 sbc block 4 bolt main install?
Give carl at cnc blocks a carl 207 892 7215 he will set you on the right path
- Wed Jan 13, 2016 5:09 pm
- Forum: Engine Tech
- Topic: Tre Taylor Lastor heads
- Replies: 7
- Views: 1598
Tre Taylor Lastor heads
Anyone have any experience with cncd heads from Taylor Lastor Tre engines out of texas. Seems to have some great stuff and we are looking at an upgrade. Thanks
- Sun Nov 01, 2015 7:22 pm
- Forum: Engine Tech
- Topic: epd heads
- Replies: 1
- Views: 824
epd heads
Looking at buying a set of used epd heads for a bbc. Tbey are raised runner and have seen limited use. Does anyone know if Larry is still freshing his heads and contact information for him. Looking to get some information on these heads before I buy thanks Darrin
- Sat Oct 17, 2015 3:54 pm
- Forum: Engine Tech
- Topic: SBC FORCED INDUCTION HEADS
- Replies: 21
- Views: 2740
Re: SBC FORCED INDUCTION HEADS
wyrmrider havent read about or seen a head that is built around a small bore 4.070 as of yet. may have to try and go with 4.125 bore and a 3.50 or 3.5625 stroke to keep below the limit of 380 cubic inch. has anyone built a combo with this bore and stroke and compared it against a small bore large st...
- Sat Oct 17, 2015 3:46 pm
- Forum: Engine Tech
- Topic: 468 bbc heads
- Replies: 11
- Views: 2195
Re: 468 bbc heads
this doesnt have a blower injected alcohol. this is a 468 bbc not the blown small block build. this one is for a friend im trying to help out thanks
- Sat Oct 17, 2015 10:25 am
- Forum: Engine Tech
- Topic: SBC FORCED INDUCTION HEADS
- Replies: 21
- Views: 2740
Re: SBC FORCED INDUCTION HEADS
How much will the large bore shorter stroke affect the tirque its for a pulling application thanks
- Sat Oct 17, 2015 10:23 am
- Forum: Engine Tech
- Topic: 468 bbc heads
- Replies: 11
- Views: 2195
Re: 468 bbc heads
They can use aftermarket blocks problem is it is for a pulling application and weight is an issue but it has to be iron block. So whats the lightest block for a cast iron bbc aand what is the biggest safe bore you can use. Thanks
- Sun Oct 11, 2015 8:59 pm
- Forum: Engine Tech
- Topic: 468 bbc heads
- Replies: 11
- Views: 2195
Re: 468 bbc heads
was thinking of the sr 20 or the headhinter series by brodix any suggestions....thnaks
- Sun Oct 11, 2015 8:57 pm
- Forum: Engine Tech
- Topic: (heads 291 & 461)circle track friend needs help
- Replies: 28
- Views: 3149
Re: (heads)circle track friend needs help
i know 2 guys who have plunty of experience with builds like this tom at 3v performance and carl at cnc blocks northeast both have built plunty of these engines with lots of success
- Thu Oct 08, 2015 9:56 pm
- Forum: Engine Tech
- Topic: 468 bbc heads
- Replies: 11
- Views: 2195
Re: 468 bbc heads
Got the rules and read them sheds a little more light on the build. no big chief or pontiac type heads 468 cubic inch seems like only rules what do you guys think?
- Thu Oct 08, 2015 9:48 pm
- Forum: Engine Tech
- Topic: SBC FORCED INDUCTION HEADS
- Replies: 21
- Views: 2740
Re: SBC FORCED INDUCTION HEADS
we will most likely not run water so either cast or billet is an option that being said we are limited to 372 cubic inch , so are we better off with a small bore and 3.625 stroke or large bore and 3.5 stroke for a pulling application