Don Terrill’s Speed-Talk

What Sizes do you have?

Cubic_Cleveland wrote: ↑Sat May 05, 2018 4:50 am Why not use metal clad viton seals? Use them almost weekly on iron guides with stainless valves no dramas with less than .002” clearance on an 11/32” stem...

I was thinking the same thing.

A customer brought me a set BBC heads. They have triple springs but the retainers are for double springs (only two steps). They fit the springs and have been running. Is this going to cause problem?

Cutting seat on a flat head

I used ONE set of 1.6 SBC rockers. I thought this was a great idea I have always struggled with rocker are geometry. Five passes (1/8 mile drag) the engine dropped a valve, the pin that holds roller on came out. After inspection the pins had moved on five other rockers. I called Miller he told me &q...

I am Looking for a Sunnen 1800 line hone mandrel

There is a kwik way 091 on ebay now in Marietta, Georgia. He has a phone number listed.

Oval or rectangular port?