Don Terrill’s Speed-Talk

Belgian1979 wrote: ↑Fri May 25, 2018 5:04 pm Is high hp useable in the States these days ? Over here it's really frustrating. Even my DD with 150 hp is too much at the speeds were allowed to drive here, the speed bumps, the speed camera's, the red lights,....

much easier...especially is the less populated areas of the country.

But how do you hook it all up on the street? Have a buddy with a twin turbo 2016 Mustang 5.0 that is supposed to be around 900-1000 at the flywheel and it blows the big tires off at any speed. on the street. Automatic car too! He's a bit scared of it to run it on the strip. The only place I could h...

I've driven a number of Z06 vettes. I'll be in a zr1 late this summer for a drive. Cant imagine needed 100 more hp in a street car.

Can't wait to drive it.

The guy above is correct that it will set lean codes long before it will misfire from being to lean. So what you are saying is PO300 is related to ignition issues or a mechanical problem more than actual fuel issues? I know how modern engine management works..but I'm from the thinking that if the e...

No thats not low enough to cause a misfire. Use a scan tool capable of telling you which cylinder is misfiring as its happening then go from there. Your way off man it is p0300 meaning multiple, not a p0302,304 etc etc. pressure is low enough for sure to cause"multiple" What do you think ...

No thats not low enough to cause a misfire. Use a scan tool capable of telling you which cylinder is misfiring as its happening then go from there.

Another vote for camcraft. They can do any radius you want (within reason of course)

WD-40 has no lubricating (high pressure/extreme pressure) features whatsoever and should not be used as such. The product name refers to "Water Displacing formula #40" which is the name given to it by the NASA engineers who developed it. It works quite well as a surface protector/rust inh...

I agree on the fact that you bought and economy unit. Dont expect much from it.

A good rider will cost you 10k+

Mine was 12k with a 60inch deck. It has 830 hours on it and hasn't ever missed a beat.

https://www.facebook.com/sathoffracing/

Im in MN and e85 is a no brainer for me. $1.65 currently and even in winter it's still 80% ethanol. Its makes more power, runs a tad cooler and the throttle response is MUCH better.

Website is gone now. Are they done?

We've made nearly 500hp with small port vortec bowties and a 2bbl carb.

I think 600 would be possible with large port vortecs and a 4bbl.

Some Gm engines have compression ratios of 11.5 to 1. They have 100k mile warranties....

bigjoe1 wrote: ↑Wed Nov 22, 2017 6:25 pm All 3.0 MM rings are low tension



JOE SHERMAN RACING

Incorrect.